JOYWAY INDUSTRIAL COMPANY LIMITED
Quality Polyurethane, Exceptional Screens, One-stop service
Add to Cart
Environmental Protection Polyurethane Adhesive for Rubber Tiles
Composition
This product is polyurethane prepolymer which based on polyether polyols and MDI
Application
It applies to make rubber tiles, which is used for paving kindergartens, excise yards and gyms etc.
Characteristics
This product has good adhesive forces with rubber granules. The rubber tiles produced by this binder have high resilience, gas permeability and excellent physical mechanical property. No stimulating odor during the process of using, which belongs to environmental protection products.
| Appearance | Slight yellow and transparent liquid |
| Viscosity(mPa·s/25℃) | 2000±500 |
Usage Method
According to the ratio of the following table to use, after sufficiently blending, then makes moulding wares.
| Mold Temperature | 120－160℃ |
| Ratio | adhesive:rubber granules＝(3-10):100 |
| Demould time | 10－20min depend on thickness |
| Pot life(15-25℃) | 50-70min |
Packing & Storage
200KG or 20KG iron drum.
Store in a cool & dry and ventilated place. Keep out of direct sunlight. Keep away from heat and water sources. This product easily absorbs moisture and goes bad. If you can’t use it up at a time, fill nitrogen gas and then seal it. The storage time of original packing is 6 months.
